VANITY LIGHT REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE

  1. REMOVE VANITY LIGHT ASSEMBLY LH

    1. E257049C01

      *1

      Protective Tape

      Using a screwdriver, detach the claw.

      Tip:

      Tape the screwdriver tip before use.

    2. Detach the guide to disconnect the vanity light assembly LH.

    3. E257050

      Detach the 2 claws to remove the vanity light assembly LH from the No. 1 roof wire.

  2. REMOVE VANITY LIGHT BULB

    1. E269141

      Remove the vanity light bulb from the No. 1 roof wire.