FRONT SEAT INNER BELT ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER (w/ Seat Belt Warning System)

    Click here

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY

    1. w/ Seat Belt Warning System:

      1. for Driver Side:

        1. B372560C01

          *a

          Clamp

          *b

          Wire Harness Clamp

          Disengage the 2 clamps.

        2. Remove the wire harness clamp.

      2. for Front Passenger Side:

        1. B372559C01

          *a

          Clamp

          *b

          Wire Harness Clamp

          Disconnect the connector.

        2. Disengage the 2 clamps.

        3. Remove the wire harness clamp.

    2. B370991

      Using a T50 "TORX" socket wrench, remove the bolt, wave washer and front seat inner belt assembly.