FRONT BUMPER REMOVAL

PROCEDURE


  1. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A005DWI

      Remove the 3 clips.

    2. Disengage the 3 guides and remove the radiator support opening cover.

  2. REMOVE FRONT BUMPER ASSEMBLY


    1. A005B72E02
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    2. A0059MXE02
      Text in Illustration
      *a 90°

      Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    3. A005DX0

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    4. A0059OF

      Remove the 6 screws.

    5. A0059R6

      Using a clip remover, remove the 3 clips.

    6. Remove the 4 bolts.

    7. A005B7J

      Disengage the 3 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. Disconnect each connector.

    9. w/ Headlight Cleaner System:


      1. A005B2X

        Disconnect the headlight cleaner hose and drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

    10. A005ADZ

      Remove the front bumper assembly as shown in the illustration.