4WD CONTROL SWITCH(for 8AR-FTS) REMOVAL

PROCEDURE

1. REMOVE FRONT DOOR SCUFF PLATE LH

   Click here

2. REMOVE COWL SIDE TRIM BOARD LH

   Click here

3. REMOVE INSTRUMENT PANEL GARNISH LH

   Click here

4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

   Click here

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

   Click here

6. REMOVE AWD LOCK SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)

   

   
   

   1. Disengage the 4 claws and remove the AWD lock switch (integration control and panel assembly) from the lower instrument panel finish panel sub-assembly.