ROAD SIGN ASSIST SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE ROAD SIGN ASSIST SYSTEM

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    1. Customizing with the multi-information display

      1. Turn the ignition switch to ON.

      2. Enter the following menus: Settings Tab.

      3. Select the setting by referring to the table below.

        Table 1. Settings Tab

        Display

        Default

        Description

        Setting

        Relevant ECU

        RSA ON/OFF

        ON

        System ON/OFF setting

        ON or OFF

        Forward recognition camera

      4. Enter the following menus: Settings Tab / Settings / Road Sign Assist Setup.

      5. Select the setting by referring to the table below.

        Table 2. Road Sign Assist Setup

        Display

        Default

        Description

        Setting

        Relevant ECU

        Excess Speed

        Only Visual

        Excess speed notification method setting

        No Notification, Only Visual or Visual and Audible

        Forward recognition camera

        Notification Level

        2 km/h (1 mph)

        Excess speed notification level setting*

        10 km/h (5 mph), 5 km/h (3 mph), 2 km/h (1 mph)

        Forward recognition camera

        Other Notifications

        Only Visual

        No overtaking notification method setting

        No Notification, Only Visual or Visual and Audible

        Forward recognition camera

        *: When the unit of speed selected for the meter is changed, the displayed unit of speed also changes.