SEAT BELT WARNING SYSTEM(w/o Occupant Classification System) DATA LIST / ACTIVE TEST
READ DATA LIST
Tip:Using the GTS to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note:In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body / (desired system) / Data List.
According to the display on the GTS, read the Data List.
Body Electrical > Combination Meter > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
P-Seatbelt Buckle SW
Front passenger side seat belt buckle signal
ON/OFF
ON: Front passenger side seat belt fastened
OFF: Front passenger side seat belt unfastened
Perform the inspection while sitting in the front passenger seat.
2nd-Row Seatbelt Buckle (R)
Rear No. 1 seat belt buckle RH signal*
ON/OFF
ON: Rear No. 1 seat belt RH fastened
OFF: Rear No. 1 seat belt RH unfastened
-
2nd-Row Seatbelt Buckle (L)
Rear No. 1 seat belt buckle LH signal*
ON/OFF
ON: Rear No. 1 seat belt LH fastened
OFF: Rear No. 1 seat belt LH unfastened
-
2nd-Row Seatbelt Buckle (C)
Rear No. 1 seat center belt buckle signal*
ON/OFF
ON: Rear No. 1 seat center belt fastened
OFF: Rear No. 1 seat center belt unfastened
-
Driver Side Seatbelt Warning Buzzer
Driver side seat belt warning buzzer signal
ON/OFF
ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled
The current customize setting is displayed.
P-Seatbelt Warning Buzzer
Front passenger side seat belt warning buzzer signal
ON/OFF
ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled
The current customize setting is displayed.
Rear Seatbelt Warning Buzzer
Front passenger side seat belt warning buzzer signal
ON/OFF
ON: Seat belt warning buzzer enabled
OFF: Seat belt warning buzzer disabled
The current customize setting is displayed.
*: w/ Rear Seat Belt Warning System
Body Electrical > Main Body > Data List
Tester Display
Measurement Item
Range
Normal Condition
Diagnostic Note
RR Door Courtesy SW
Rear door LH courtesy light switch signal*
ON/OFF
ON: Rear door LH open
OFF: Rear door LH closed
-
RL Door Courtesy SW
Rear door RH courtesy light switch signal*
ON/OFF
ON: Rear door RH open
OFF: Rear door RH closed
-
D Seat Buckle SW
Driver side seat belt buckle signal
ON/OFF
ON: Driver side seat belt fastened
OFF: Driver side seat belt unfastened
-
*: w/ Rear Seat Belt Warning System
PERFORM ACTIVE TEST
Tip:Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body / Combination Meter / Active Test.
According to display on the GTS, perform the Active Test.
Body Electrical > Combination Meter > Active Test
Tester Display
Measurement Item
Control Range
Diagnostic Note
Driver Side Seat Belt
Front seat belt warning light
ON/OFF
Confirm that the vehicle is stopped.
Rear Seat Belt
Rear seat belt warning light*
ON/OFF
Confirm that the vehicle is stopped.
*: w/ Rear Seat Belt Warning System