WASHER MOTOR REMOVAL

PROCEDURE

  1. REMOVE FRONT FENDER FRONT SPLASH SHIELD RH

    Tip:

    Use the same procedure described for the LH side.

    Click here

  2. REMOVE FRONT FENDER LINER RH

    1. B427877C01

      *a

      90°

      Using a screwdriver, turn the pin hold clip 90° and remove the pin hold clip.

    2. B427876

      Remove the 2 screws.

    3. B427879

      Remove the 4 grommets.

    4. B427878

      Remove the 6 clips and front fender liner RH.

  3. DRAIN WASHER FLUID

    1. E268371

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tip:

      Use a container to collect the washer fluid.

  4. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

    1. E268372

      Disconnect the connector and hose.

    2. Pull out the windshield washer motor and pump assembly from the packing of the windshield washer jar assembly.

  5. REMOVE FRONT BUMPER COVER

    Click here

  6. REMOVE WASHER INLET SUB-ASSEMBLY

    1. E268373

      Remove the clip.

    2. Pull the washer inlet sub-assembly upward to remove it from the windshield washer jar assembly.

  7. REMOVE WINDSHIELD WASHER JAR ASSEMBLY

    1. w/o Headlight Cleaner System:

      1. Detach the 6 clamps.

        B427694C01

        *a

        Guid

        -

        -
        V100135

        Bolt

        		 V100136

        Connector

      2. Disconnect the connector.

      3. Remove the 3 bolts. Then detach guide and remove the windshield washer jar assembly.

    2. w/ Headlight Cleaner System:

      1. Detach the 6 clamps.

        E268374C01

        *a

        Guid

        -

        -

      2. Disconnect the 3 connectors.

      3. Remove the 3 bolts. Then detach guide and remove the windshield washer jar assembly.

  8. REMOVE LEVEL WARNING SWITCH ASSEMBLY

    1. E268377

      Pull out the level warning switch assembly in thedirection indicated by arrow in the illustration toremove it.

  9. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY (w/ Headlight Cleaner System)

    E268375

    1. Remove the headlight cleaner motor and pump assembly.

  10. REMOVE HEADLIGHT CLEANER CONTROL RELAY (w/ Headlight Cleaner System)

    E268376

    1. Detach the claw and remove the headlight cleaner control relay.