PERSONAL LIGHT(for Rear) INSPECTION

PROCEDURE

  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY

    1. E177527C01

      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly)

      Apply battery voltage to the connector and check the LED illumination condition.

      OK

      Measurement Condition

      Specified Condition

      Battery positive (+) → Terminal 2 (+B)

      Battery negative (-) → Terminal 1 (GND)

      LED illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly.