METER / GAUGE SYSTEM

The combination meter assembly has a built-in meter ECU and buzzer.

Figure 1. Models with Optitron Meter

*A	Models for Europe (LHD Models)	*B	Models for Europe (RHD Models)
*a	Multi-information Display	*b	The illustrations shown are examples only.

Figure 2. Models with Optitron Meter

*A	Except Models for Europe	-	-
*a	Multi-information Display	*b	The illustrations shown are examples only.

Figure 3. Models with TFT LCD Meter

*A	Models for Europe	*B	Except Models for Europe
*a	Multi-information Display	*b	The illustrations shown are examples only.

Combination Meter Assembly (Models with TFT LCD Meter)

1. Opening/Ending Ceremony

   
   

   • When the power switch is turned on (IG), the needles and panels of the engine coolant temperature gauge and fuel gauge illuminate.

   • Then, the multi-information display and the needle and panels inside the center ring monitor illuminate and the system check starts. After the system check is complete, the meter starts displaying each information.

   • When the power switch is turned off, the multi-information display, the needles and panels of the engine coolant temperature gauge and fuel gauge turn off.

   • After that, the needle and engine speed marks of the tachometer inside the center ring monitor turn off in sequence, and the odometer turns off.

     

     *a	IG ON	*b	IG OFF
     *c	The illustrations shown are examples only.	-	-

2. Driving Mode

   
   

   • When SPORT S or SPORT S+ mode is selected as drive mode, the tachometer display is emphasized.

     

     *a	The illustrations shown are examples only.	-	-
     	SPORT S, SPORT S+ MODE ON		SPORT S, SPORT S+ MODE OFF

3. Rev Indicator

   
   

   • When the engine speed exceeds a set level, the rev indicator (yellow ring) is illuminated in the tachometer.

     Tech Tips

     The set level can be changed using the setting function.

   • If the engine speed exceeds 6000 rpm, the rev indicator (red ring) is illuminated in the tachometer.

     

     *a

     Rev Indicator

     *b

     The illustration shown is an example only.

4. Tachometer Peak Hold Display

   
   

   • The tachometer peak hold display, which displays the afterimage of the tachometer needle at the maximum engine speed, is provided.

   • If the engine speed is changed due to shift change operation, the afterimage of the maximum engine speed is displayed for 0.5 seconds.

   • This function operates when the engine speed is 5000 rpm or more.

     

     *a

     Tachometer Peak Hold Display

     *b

     The illustrations shown are examples only.

5. Center Ring Monitor

   
   

   • The center ring monitor shows the following information:

     Item	Outline
     Speedometer	Displays the current vehicle speed.
     Shift Position Indicator	Displays the current shift position.
     Hybrid System Indicator / Tachometer	The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output. The tachometer displays the engine speed. When SPORT S or SPORT S+ mode is selected, the tachometer replaces the hybrid system indicator.
     Drive Mode	Displays the current driving mode: ECO Mode SPORT S Mode SPORT S+ Mode CUSTOMIZE Mode
     Odo / Trip Meter	Displays the odometer, trip meter A or trip meter B. Displayed item can be switched by pressing the ODO/TRIP switch.

6. Multi-information Display

   
   

   • The multi-information display shows the following information.

     Item	Outline
     Outside Temperature	The outside temperature is displayed. When the outside temperature drops below 3°C (37°F), an ice warning light illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning light flashes 10 times, the light stays on. When the temperature reaches 5°C (41°F), the light goes off.
     Indicator	When the display conditions are met, the following indicators illuminate. Cruise Control Indicator Cruise Control Indicator (Vehicle-to-Vehicle Distance Control Mode)*1 Cruise SET Indicator Lane Departure Alert Indicator*2
     Information	The following information can be displayed on the multi-information display by switching between tabs. Drive Information Navigation Information*1 Audio Information Dynamic Radar Cruise Control System*2/Lane Departure Alert System*3 Inform Message Settings The tab can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.
     Light Control Rheostat	Meter panel luminance can be changed by using the rheostat switch.

     *1: Models with navigation system

     *2: Models with dynamic radar cruise control system

     *2: Models with lane departure alert system

   • The drive information display shows the following information.

     Item

     Outline

     Drive Information

     The following items can be displayed. The 6 display items can be selected in the setting screen: Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) Total Average Fuel Consumption Between Reset Operations. Average Fuel Consumption After Engine Start-up Average Fuel Consumption After Refueling Total Average Vehicle Speed Between Reset Operations Average Vehicle Speed After Engine Start-up Cruising Range After Engine Start-up Total Elapsed Time Between Reset Operations Elapsed Time After Engine Start-up Cruising Range Blank In addition to the above functions, the following items can be displayed. Energy Monitor Sway Warning* AWD Control G Monitor Tire Pressure Indicator Unit Change Tech Tips The unit displayed on the multi-information display can be selected by using the ENTER switch of the steering pad switch assembly. MPH km/h The item shown can be changed using the UP/DOWN switch of the steering pad switch assembly.

     *: Models with lane departure alert system

Hybrid System Indicator

1. The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.

2. The scale for the Hybrid System Indicator is divided into 3 areas (Charge, Eco, Power). The role of each area is as follows.

   

   *A	Optitron Meter	*B	TFT LCD Meter
   *a	Charge Area	*b	Hybrid Eco Area
   *c	Eco Area	*d	Power Area
   *e	The illustrations shown are examples only.	-	-

   Information Displayed in Hybrid System Indicator

   Area	Function
   Charge	The Charge area indicates when energy is being regenerated.
   Eco	The Eco area indicates when the vehicle is being driven in an Eco-friendly manner. The Hybrid Eco area indicates that the vehicle is driven in a manner that promotes frequent motor only operation. (Based on various conditions, the hybrid vehicle control ECU assembly controls if the engine should be stopped to enhance fuel efficiency.)
   Power	The Power area indicates that the Eco-friendly driving range is being exceeded (during full power driving, etc.).

Headup Display

1. The headup display shows the following information:

   

   The illustrations shown are examples only.

   Area	Displayed Item
   a	Pre-crash warning display*1 Unsteady driving alert display Hands off steering wheel alert display Audio system operation status display Dynamic radar cruise control system notification display*2 Outside temperature/icy street warning display Intiutive parking assist system detection display*3
   b	Navigation system-linked display
   c	Hybrid System Indicator Tachometer
   d	Master Warning Information
   e	Speedometer Traffic Sign Display
   f	Shift Position Indicator
   g	Pre-crash safety system display*1 Dynamic radar cruise control system display*2/Cruise control system display Clearance sonar detection display*3 Lane departure alert system display*4

   *1: Models with pre-crash safety system

   *2: Models with dynamic radar cruise control system

   *3: Models with LEXUS parking assist-sensor system

   *4: Models with lane departure alert system