LUGGAGE COMPARTMENT DOOR LOCK(for Sedan) INSPECTION

PROCEDURE

  1. INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY

    1. Check the operation of the door lock motor.

      1. B297551C25

        *a

        Close (Lock)

        *b

        Open (Unlock)

        *c

        Component without harness connected

        (Luggage Compartment Door Lock Assembly)

        Move the door lock to the close (lock) position.

      2. Apply battery voltage to the door lock motor and check the operation of the door lock motor.

        OK

        Condition

        Result

        Battery positive (+) → Terminal 1 (B)

        Battery negative (-) → Terminal 2 (E)

        Luggage compartment door lock motor open (unlock) operation

        If the result is not as specified, replace the luggage compartment door lock assembly.

    2. Check the operation of the door courtesy switch.

      1. B297551C26

        *a

        Close (Lock)

        *b

        Open (Unlock)

        *c

        Component without harness connected

        (Luggage Compartment Door Lock Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard resistance

        Tester Connection

        Condition

        Specified Condition

        2 (E) - 3 (D+)

        Closed (Locked)

        10 kΩ or higher

        2 (E) - 3 (D+)

        Open (Unlocked)

        Below 1 Ω

        If the result is not as specified, replace the luggage compartment door lock assembly.