FRONT SEAT CUSHION HEATER (for Separate Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  4. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    A01DZTIE01

    1. Remove the 2 screws.

    2. Detach the 2 hooks in the order shown in the illustration and remove the front seat inner cushion shield LH.

  5. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01E11ZE01
      Text in Illustration
      *1 Protective Tape

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE FRONT SEAT CUSHION SHIELD LH

    A01E0JOE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 2 hooks in the order shown in the illustration, and then detach the guide and remove the front seat cushion shield LH.

  7. REMOVE SEATBACK SPRING LH


    1. A01DW06

      Remove the seatback spring LH.

  8. REMOVE SEAT TRACK CONTROL CABLE BRACKET RH (for Walk in Seat Type)

    A01E0CI

    1. Using a screwdriver, remove the E-ring.

    2. Detach the hook and remove the seat track control cable bracket RH.

  9. REMOVE SEAT TRACK CONTROL CABLE BRACKET LH (for Walk in Seat Type)

    Tech Tips

    Use the same procedure described for the RH side.

  10. REMOVE FRONT SEATBACK HINGE PLATE (for Walk in Seat Type)

    A01E09X

    1. Remove the front seatback hinge plate.

  11. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. A01DXMH

      Remove the hog rings and fold back the separate type front seat cushion cover.

    2. A01DWDZ

      Disconnect the front seatback heater assembly LH connector.

    3. A01E0E1E02

      Remove the 4 bolts and separate type front seatback assembly.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01E051

      for Front Passenger Side, w/ Seat Belt Warning System:

      Detach the wire harness clamp.

    2. A01E0VU

      for LHD, w/ Seat Heater System:

      Detach the 3 front seat cushion heater assembly LH wire harness clamps.

    3. A01E2Y2

      Remove the hog rings.

    4. A01E1MU

      Bend the 2 front seat cushion frame claws upward.

    5. Detach the hooks and remove the separate type front seat cushion cover together with the pad from the front seat cushion frame sub-assembly LH.

      A01E0OS

    6. Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

      A01DX4LE01
      Text in Illustration
      *A for Vinyl Seat, for Cloth Seat *B for Leather Seat

  13. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY LH


    1. A01E2XC

      Cut off the tack pins which hold down the front seat cushion heater assembly LH, and then remove the front seat cushion heater assembly LH from the separate type front seat cushion cover.

      Note

      Be careful not to damage the separate type front seat cushion cover.