ENGINE OIL COOLER INSTALLATION

PROCEDURE

1. INSTALL OIL COOLER ASSEMBLY

   
   

   1. Install a new oil control valve filter to the cylinder block sub-assembly.

   2. Install 2 new oil cooler gaskets to the oil cooler assembly.

   3. Install the oil cooler assembly to the cylinder block sub-assembly with the 4 bolts.

      Torque:

      16 N*m  { 163 kgf*cm, 12 ft.*lbf }

   4. Connect the No. 1 water by-pass hose and No. 2 water by-pass hose to the oil cooler assembly, and slide the 2 clips to secure them.

2. ADD ENGINE OIL

   Click here

3. ADD ENGINE COOLANT

   Click here

4. INSPECT FOR COOLANT LEAK

   Click here

5. CHECK ENGINE OIL LEVEL

   Click here

6. INSPECT ENGINE OIL LEAK

   Click here

7. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY

   Click here

8. INSTALL NO. 1 ENGINE UNDER COVER

   Click here

9. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH

   Click here

10. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

    Click here