FRONT SEAT CUSHION HEATER(for Manual Seat) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER LH

    Tech Tips


    • When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.

      Click here


    • Align the seam allowance in a single direction as shown in the illustration.

    B0057Q3N01

    1. B0058L0C01
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type front seat cushion cover LH to the separate type front seat cushion pad LH with 4 new hog rings in the order indicated in the illustration.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    2. B0058S4

      Return the seat cover wire to its original position.

      Tech Tips

      Use the same procedure for both seat cover wires.

    3. B0058LXC01
      *1 Hog Ring Pliers

      Using hog ring pliers, install the separate type front seat cushion cover LH to the separate type front seat cushion pad LH with 14 new hog rings in the order indicated in the illustration.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

    4. B00579MC01
      *1 Hog Ring Pliers

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.

  2. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD LH

    Click here

  3. INSTALL FRONT INNER SEAT CUSHION SHIELD LH

    Click here

  4. INSTALL FRONT SEAT CUSHION SHIELD LH

    Click here

  5. INSTALL VERTICAL ADJUSTING HANDLE LH

    Click here

  6. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH

    Click here

  7. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  8. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY LH

    Click here