REAR SEAT CUSHION HEATER(for LH Side) INSPECTION

PROCEDURE

  1. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY LH

    1. B434020C01

      *1

      Connector A

      *2

      Connector B

      *a

      Component without harness connected

      (Rear Seat Cushion Heater Assembly LH)

      Check the rear seat cushion heater assembly LH.

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        A1(B) - A2 (E)

        Seat cushion heater temperature 20°C (68°F)

        3.28 to 3.92 Ω

        A1 (B) - B1

        Below 1 Ω

        A1 (B) - B2

        3.28 to 3.92 Ω

        A2 (B) - B1

        3.21 to 3.85 Ω

        If the result is not as specified, replace the rear seat cushion heater assembly LH.