PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU) DTC CHECK / CLEAR

CHECK DTC (USING GTS)

1. Connect the GTS to the DLC3.

2. Turn the power switch on (IG).

3. Turn the GTS on.

4. Enter the following menus:

   • Chassis / IPA/Parking Assist Monitor / Trouble Codes

   • Body Electrical / Navigation System / Trouble Codes

5. Check for DTCs, and then write them down.

6. Check for DTCs.

   Chassis > IPA/Parking Assist Monitor > Trouble Codes

   Body Electrical > Navigation System > Trouble Codes

   Note:

   The radio and display receiver assembly outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the parking assist monitor system are output, refer to Diagnostic Trouble Code Chart for the relevant systems.

   System	Proceed to
   Navigation System	Click here
   Audio and Visual System (for Radio and Display Type)	Click here

CLEAR DTC (USING GTS)

1. Connect the GTS to the DLC3.

2. Turn the power switch on (IG).

3. Turn the GTS on.

4. Enter the following menus:

   • Chassis / IPA/Parking Assist Monitor / Trouble Codes

   • Body Electrical / Navigation System / Trouble Codes

5. Clear the DTCs.

   Chassis > IPA/Parking Assist Monitor > Clear DTCs

   Body Electrical > Navigation System > Clear DTCs

CHECK DTC (USING DIAGNOSTIC MODE)

1. Refer to navigation system (w/ Navigation System).

   Click here

2. Refer to audio and visual system (w/o Navigation System).

   Click here

CLEAR DTC (USING DIAGNOSTIC MODE)

1. Refer to navigation system (w/ Navigation System).

   Click here

2. Refer to audio and visual system (w/o Navigation System).

   Click here