POWER SEAT SWITCH REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for RHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01E03GE02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield.

    2. Using a screwdriver, detach the 2 claws and remove the reclining power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01DXK4E02
      Text in Illustration
      *1 Protective Tape

      Apply protective tape around the front seat cushion shield.

    2. Using a screwdriver, detach the 4 claws and remove the slide and vertical power seat switch knob.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE FRONT SEAT CUSHION SHIELD RH


    1. A01DXZM

      Remove the 2 screws.

    2. A01DXHX

      Remove the 3 screws.

    3. Detach the claw and guide.

    4. Remove the front seat cushion shield RH.

  5. REMOVE FRONT POWER SEAT SWITCH RH


    1. A01E164

      Remove the 3 screws.

    2. Disconnect the connector and remove the front power seat switch RH.