SFI SYSTEM PARTS LOCATION
ILLUSTRATION
*1 |
FUEL PUMP |
*2 |
HEATED OXYGEN SENSOR |
*3 |
MASS AIR FLOW METER SUB-ASSEMBLY |
*4 |
PARK/NEUTRAL POSITION SWITCH (for CVT MODELS) |
*5 |
NO. 2 ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - ST NO.1 RELAY - ST NO.2 RELAY |
*6 |
ENGINE ROOM RELAY BLOCK AND JUNCTION BLOCK ASSEMBLY - EFI-MAIN NO.1 RELAY - EFI-MAIN NO.2 RELAY - IG2 RELAY - C/OPN RELAY - EFI-MAIN NO.1 FUSE - EFI-MAIN NO.2 FUSE - EFI NO.1 FUSE - EFI NO.2 FUSE - VLVMATIC FUSE - IG2 FUSE - ETCS FUSE - ST FUSE - ST NO.2 FUSE |
*7 |
ECM |
- |
- |
ILLUSTRATION
*1 |
CAMSHAFT POSITION SENSOR (for INTAKE CAMSHAFT) |
*2 |
CONTINUOUSLY VARIABLE VALVE LIFT CONTROLLER ASSEMBLY |
*3 |
ENGINE COOLANT TEMPERATURE SENSOR |
*4 |
FUEL INJECTOR ASSEMBLY |
*5 |
KNOCK SENSOR |
*6 |
MANIFOLD ABSOLUTE PRESSURE SENSOR |
*7 |
PURGE VSV |
*8 |
THROTTLE BODY ASSEMBLY |
*9 |
VACUUM SWITCHING VALVE ASSEMBLY (FOR ACOUSTIC CONTROL INDUCTION SYSTEM) |
*10 |
IGNITION COIL ASSEMBLY |
*11 |
CAMSHAFT POSITION SENSOR (for EXHAUST CAMSHAFT) |
- |
- |
ILLUSTRATION
*1 |
AIR FUEL RATIO SENSOR |
*2 |
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for INTAKE CAMSHAFT) |
*3 |
CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for EXHAUST CAMSHAFT) |
*4 |
ENGINE OIL TEMPERATURE SENSOR |
*5 |
CRANKSHAFT POSITION SENSOR |
- |
- |
ILLUSTRATION
*A |
for LHD |
- |
- |
*1 |
ACCELERATOR PEDAL SENSOR ASSEMBLY (ACCELERATOR PEDAL POSITION SENSOR) |
*2 |
INSTRUMENT PANEL JUNCTION BLOCK - IGN FUSE - STOP FUSE |
*3 |
COMBINATION METER ASSEMBLY |
*4 |
CLUTCH START SWITCH ASSEMBLY (for MANUAL TRANSAXLE MODELS) |
*5 |
DLC3 |
*6 |
STOP LIGHT SWITCH ASSEMBLY |
*7 |
ENGINE STOP AND START ECU |
- |
- |
ILLUSTRATION
*A |
for RHD |
- |
- |
*1 |
ACCELERATOR PEDAL SENSOR ASSEMBLY (ACCELERATOR PEDAL POSITION SENSOR) |
*2 |
INSTRUMENT PANEL JUNCTION BLOCK - IGN FUSE - STOP FUSE |
*3 |
COMBINATION METER ASSEMBLY |
*4 |
STOP LIGHT SWITCH ASSEMBLY |
*5 |
DLC3 |
*6 |
ENGINE STOP AND START ECU |