WASHER NOZZLE(for Front Side) ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for Hatchback, Wagon)

   1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard

      Washer fluid hits the windshield in the areas shown in the illustration.

      

      *a	Vehicle center line	-	-
      	Measurement	-	-

      Standard Measurement

      Area	Measurement	Area	Measurement
      A	405 mm (1.33 ft.)	B	165 mm (6.50 in.)
      C	100 mm (3.94 in.)	-	-

      Tip:

      If the result is not as specified, replace the washer nozzle sub-assembly.

2. INSPECT WASHER NOZZLE SUB-ASSEMBLY (for Sedan)

   1. Operate the washer nozzle sub-assembly and check the position that the washer fluid hits the windshield.

      Standard

      Washer fluid hits the windshield in the areas shown in the illustration.

      

      *a	Vehicle center line	-	-
      	Measurement	-	-

      Standard Measurement

      Area	Measurement	Area	Measurement
      A	500 mm (1.64 ft.)	B	165 mm (6.50 in.)
      C	75 mm (2.95 in.)	-	-

      Tip:

      If the result is not as specified, replace the washer nozzle sub-assembly.