STARTER DISASSEMBLY


  1. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. B007OXO

      Remove the nut and disconnect the lead wire from terminal C.

    2. B007UHS

      Remove the 2 nuts from the repair service starter kit while holding the magnet starter switch assembly.

    3. B007P0A

      Pull the magnet starter switch assembly and, while lifting the front part of the magnet starter switch assembly, release the plunger hook from the starter pinion drive lever and remove the magnet starter switch assembly.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. B007OTU

      Using a T25 "TORX" socket wrench, remove the 2 bolts.

    2. B007PNS

      Remove the starter yoke assembly and starter commutator end frame assembly from the repair service starter kit.

    3. B007U6J

      Remove the starter armature plate from the starter yoke assembly or repair service starter kit.

    4. B007UNJ

      Remove the 3 planetary gears from the repair service starter kit.

    5. B007TKN

      Remove the rubber seal from the repair service starter kit.

  3. REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. B007URS

      Remove the 2 screws from the starter commutator end frame assembly.

    2. B007TM8

      Remove the starter commutator end frame assembly from the starter yoke assembly.

      Note

      While holding down the lead wire, remove the starter commutator end frame assembly.

    3. B007W1U

      Remove the starter brush holder assembly from the starter armature assembly.

  4. REMOVE STARTER ARMATURE ASSEMBLY


    1. B007TVM

      Remove the starter armature assembly from the starter yoke assembly.