FRONT SEATBACK HEATER (for Separate Seat Type) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  4. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    A01DZTIE01

    1. Remove the 2 screws.

    2. Detach the 2 hooks in the order shown in the illustration and remove the front seat inner cushion shield LH.

  5. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01E11ZE01
      Text in Illustration
      *1 Protective Tape

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE FRONT SEAT CUSHION SHIELD LH

    A01E0JOE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 2 hooks in the order shown in the illustration, and then detach the guide and remove the front seat cushion shield LH.

  7. REMOVE SEATBACK SPRING LH


    1. A01DW06

      Remove the seatback spring LH.

  8. REMOVE SEAT TRACK CONTROL CABLE BRACKET RH (for Walk in Seat Type)

    A01E0CI

    1. Using a screwdriver, remove the E-ring.

    2. Detach the hook and remove the seat track control cable bracket RH.

  9. REMOVE SEAT TRACK CONTROL CABLE BRACKET LH (for Walk in Seat Type)

    Tech Tips

    Use the same procedure described for the RH side.

  10. REMOVE FRONT SEATBACK HINGE PLATE (for Walk in Seat Type)

    A01E09X

    1. Remove the front seatback hinge plate.

  11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. for LHD, w/ Seat Heater System:


      1. A01DXMH

        Remove the hog rings and fold back the separate type front seat cushion cover.

      2. A01DWDZ

        Disconnect the front seatback heater assembly LH connector.

    2. A01E0E1E02

      Remove the 4 bolts and front seatback assembly.

    3. Detach the 2 pieces of fastening tape and remove the hog rings, and then roll up the separate type front seatback cover.

      A01DYGGE01
      Text in Illustration
      *1 Fastening Tape - -
    4. A01DXH4

      Remove the hog rings and detach the 2 straps of the separate type front seatback cover, and then roll up the separate type front seatback cover.

    5. A01DZON

      Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.

    6. Remove the hog rings and roll up the separate type front seatback cover.

      A01DX96E01
      Text in Illustration
      *A for Vinyl Seat, for Cloth Seat *B for Leather Seat
      *a Front view of front seatback *b Rear view of front seatback
    7. A01E2KR

      Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.

  12. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH


    1. A01DWIS

      Cut off the tack pins which hold down the front seatback heater assembly LH, and then remove the front seatback heater assembly LH from the separate type front seatback cover.

      Note

      Be careful not to damage the separate type front seatback cover.