FRONT WIPER RUBBER REPLACEMENT

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for both the RH and LH sides.

  • The procedure described below is for the LH side.

PROCEDURE


  1. REMOVE FRONT WIPER BLADE


    1. A004HQLE01
      Text in Illustration
      *1 Holder

      Remove the holder of the front wiper blade.

    2. Remove the front wiper blade from the front wiper arm as shown in the illustration.

      Note

      Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.

  2. REMOVE WIPER RUBBER


    1. A004HNS

      Remove the wiper rubber with the wiper rubber backing plates from the front wiper blade.

    2. A004I1K

      Remove the 2 wiper rubber backing plates from the wiper rubber.

  3. INSTALL WIPER RUBBER


    1. A004H5B

      Install the 2 wiper rubber backing plates to the wiper rubber.

      Note


      • Align the protrusions on the wiper rubber and the notches of the backing plates.

      • Align the curves of the backing plates and the glass.

    2. A004HCR

      Install the wiper rubber to the front wiper blade as shown in the illustration.

      Note

      Push the wiper rubber into the wiper blade strongly to engage them securely.

  4. INSTALL FRONT WIPER BLADE


    1. A004JA5E01
      Text in Illustration
      *1 Holder

      Install the front wiper blade as shown in the illustration.

    2. Install the holder of the front wiper blade.