CAMSHAFT POSITION SENSOR REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE BATTERY

    Click here

  4. REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

    1. A426004

      Disconnect the camshaft position sensor connector.

    2. A426005

      Remove the bolt and camshaft position sensor from the cylinder head sub-assembly.

      Note:

      If the camshaft position sensor has been struck or dropped, replace it.

  5. REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

    1. A426002

      Disconnect the camshaft position sensor connector.

    2. A426003

      Remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

      Note:

      If the camshaft position sensor has been struck or dropped, replace it.