FRONT BRAKE FLEXIBLE HOSE REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH and LH sides.

  • The procedures listed below are for the LH side.

PROCEDURE

  1. REMOVE FRONT WHEEL

  2. DRAIN BRAKE FLUID

    Note:

    Wash off brake fluid immediately if it comes in contact with any painted surface.

  3. REMOVE FRONT FLEXIBLE HOSE

    1. C278619E01

      Disconnect the brake tube labeled A from the flexible hose using a union nut wrench while holding the flexible hose with a wrench.

      Note:

      • Do not bend or damage the brake tube.

      • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting point.

    2. Remove the clip labeled B.

    3. Remove the 2 bolts labeled C and D, and then remove the flexible hose clamp labeled E from the knuckle.

    4. C278595C01

      *1

      Flexible Hose Bracket

      *2

      Flexible Hose Clamp

      *3

      Sensor Clamp

      Remove the sensor clamp and flexible hose clamp from the flexible hose bracket.

    5. C127057

      Remove the union bolt and gasket, and then remove the flexible hose from the disc brake cylinder.