CLUTCH SYSTEM


  1. CONSTRUCTION


    1. A plunger type clutch master cylinder assembly is used.

    2. A resin master cylinder is used to achieve weight reduction.

      Figure 1. Models with 1TR-FE, 2TR-FE, 2KD-FTV Low Version or 5L-E Engine

      B0020JJC01
      *1 Clutch Master Cylinder Assembly *2 Cylinder Push Rod Clevis Sub-assembly

      Figure 2. Models with 1GD-FTV (without iMT System), 2GD-FTV, 1KD-FTV or 2KD-FTV High Version Engine

      B0020JNC01
      *1 Clutch Master Cylinder Assembly *2 Cylinder Push Rod Clevis Sub-assembly

      Figure 3. Models with 1GD-FTV Engine (with iMT System)

      B0020KXC01
      *1 Clutch Master Cylinder Assembly *2 Clutch Stroke Sensor
      *3 Sensor Magnet *4 Cylinder Push Rod Clevis Sub-assembly
      *5 Sensor Yoke - -