REAR COMBINATION LIGHT ASSEMBLY (w/ Aero Stabilizing Fin) REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    B007RRZE01
    Text in Illustration
    *1 Protective Tape
    *2 Pin

    1. Put protective tape around the rear combination light assembly LH.

    2. Remove the 2 screws.

    3. Move the rear combination light assembly LH in the direction of the arrow in the illustration, and detach the 2 pins.

    4. Disconnect the connector and remove the rear combination light assembly LH.