STEREO JACK ADAPTER ASSEMBLY INSTALLATION


  1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY


    1. A01DY8I

      Attach the 2 claws to install the stereo jack adapter.

  2. INSTALL SWITCH BASE


    1. Connect the connectors.

    2. Attach the 8 claws to install the switch base.

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY


    1. Attach the 3 guides, 2 claws and 3 clips to install the lower instrument panel finish panel.

  4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01E050E01
    Text in Illustration
    *1 Hinge

    1. Attach the 2 hinges to install the glove compartment door.

    2. A01E1H5E01
      Text in Illustration
      *1 Stopper

      While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.