SEAT BELT WARNING LIGHT INSPECTION

PROCEDURE

  1. INSPECT REAR SEAT BELT WARNING LIGHT (TELLTALE LIGHT ASSEMBLY)

    1. B371365C01

      *a

      LH

      *b

      RH

      *c

      Component without harness connected

      (Telltale Light Assembly)

      Apply battery voltage to the connector according to the table below.

      OK

      Battery Connection

      Result

      Battery positive (+) - Terminal 1

      Battery negative (-) - Terminal 4

      LH comes on

      Battery positive (+) - Terminal 1

      Battery negative (-) - Terminal 3

      RH comes on

      If the result is not as specified, replace the telltale light assembly.