ACCELERATOR PEDAL INSTALLATION

PROCEDURE

1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

   Note:

   • Avoid physical shock to the accelerator pedal sensor assembly.

   • Do not disassemble the accelerator pedal sensor assembly.

   • The accelerator pedal sensor assembly does not require lubrication.

   • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

   1. for LHD:

      1. Install the accelerator pedal sensor assembly with the 3 bolts.

         8.5 N*m

         87 kgf*cm

         75 in.*lbf

         Note:

         If the accelerator pedal sensor assembly has been struck or dropped, replace it.

      2. Connect the accelerator pedal sensor assembly connector.

   2. for RHD:

      1. Install the accelerator pedal sensor assembly with the 2 nuts.

         7.0 N*m

         71 kgf*cm

         62 in.*lbf

         Note:

         If the accelerator pedal sensor assembly has been struck or dropped, replace it.

      2. Connect the accelerator pedal sensor assembly connector.