MAIN BODY ECU INSTALLATION

PROCEDURE

  1. INSTALL BODY ECU

    Note:

    • Make sure that the connecting surfaces are free of foreign matter.

    • Do not touch the body ECU connector.

    1. E294113C01

      *1

      Driver Side Junction Block Assembly

      *2

      Body ECU
      V100155

      Push Area

      Press the push area until the 2 claws engage to install the body ECU as shown in the illustration.

      Note:

      • Make sure to press only the push area.

      • Confirm the engagement of the body ECU and driver side junction block assembly by listening for the click sound of the lock engaging.

      Tip:

      If a click sound cannot be heard, visually check the engagement of the lock. The engagement can also be confirmed if the body ECU and driver side junction block assembly are flush.

  2. INSTALL DRIVER SIDE JUNCTION BLOCK ASSEMBLY WITH BODY ECU

    1. Connect each connector.

    2. E294109

      Slide the connector lock to engage the claw as shown in the illustration.

      Note:

      Be sure to connect the connector securely.

    3. Connect the connector.

    4. Install the driver side junction block assembly with body ECU with the nut and bolt.

      8.4 N*m

      86 kgf*cm

      74 in.*lbf

    5. Engage the clamp.

    6. Connect each connector.

  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL

    Click here

  4. INSTALL UPPER INSTRUMENT PANEL

    Click here