AIR CONDITIONING SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE AIR CONDITIONING SYSTEM

   
   

   1. Customizing with the GTS

      Tech Tips

      The following items can be customized.

      Note

      
      

      • When the customer requests a change in a function, first make sure that the function can be customized.

      • Be sure to make a note of the current settings before customizing.

      • When troubleshooting a function, first make sure that the function is set to the default setting.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Body Electrical / Air Conditioner / Utility / Customize.

      5. Select the setting by referring to the table below.

         Air Conditioner

         Tester Display	Default	Content	Setting	Relevant ECU
         Set Temperature Shift	Normal	Function to perform control with the shifted temperature versus the displayed temperature	-2C, -1C, Normal, +1C, +2C	Air Conditioning Amplifier Assembly
         Air Inlet Mode	Automatic	In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode	Automatic or Manual	Air Conditioning Amplifier Assembly
         Foot/DEF Auto Mode	ON	Function to turn the airflow from FOOT/DEF ON automatically when AUTO MODE is ON	ON or OFF	Air Conditioning Amplifier Assembly
         Foot/DEF Automatic Blow Up Function	ON	Function to increase the blower level automatically when the defroster is ON	ON or OFF	Air Conditioning Amplifier Assembly
         Ambient Temperature Shift	Normal	Function to display shifted ambient temperature versus actual ambient temperature	-3C, -2C, -1C, Normal, +1C, +2C, +3C	Air Conditioning Amplifier Assembly
         ECO MODE Cancel	OFF	Function to cancel the ECO mode drive when item is on	OFF or ON	Air Conditioning Amplifier Assembly
         Noise and Vibration Reduction	OFF	Function to change speed of the compressor when item is on	OFF or ON	Air Conditioning Amplifier Assembly

   2. Customizing using the Multi-display (w/ Navigation Receiver Type)

      
      

      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Climate settings

      3. Select the setting by referring to the table below:

         Display	Default	Content	Setting	Relevant ECU
         Efficient Ventilation Mode	On	In case of turning the A/C ON to cool the cabin down quickly, this is the function to change the mode automatically to RECIRCULATION mode	On or Off	Air conditioning amplifier assembly