CHILD RESTRAINT SEAT ANCHOR BRACKET INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The following procedure is for LHD vehicles.

PROCEDURE


  1. INSTALL CROSS ANCHOR BRACKET SUB-ASSEMBLY (for LH Side)


    1. A001TZ2N01

      Temporarily install the cross anchor bracket sub-assembly with the 2 bolts.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      19.5 N*m  { 199 kgf*cm, 14 ft.*lbf }
    3. A001UWG

      Engage the clamps.

  2. INSTALL CROSS ANCHOR BRACKET SUB-ASSEMBLY (for RH Side)


    1. A001SZPN01

      Temporarily install the cross anchor bracket sub-assembly with the 2 bolts.

    2. Tighten the 2 bolts in the order shown in the illustration.

      Torque:
      19.5 N*m  { 199 kgf*cm, 14 ft.*lbf }
    3. A001SL6

      Engage the clamps.

  3. INSTALL REAR SEAT CUSHION LOCK HOOK

    Click here

  4. INSTALL BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  5. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

    Click here