NAME PLATE(for Hatchback) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Table 1. Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate or Emblem

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE

  1. INSTALL NO. 1 BACK DOOR EMBLEM

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new No. 1 back door emblem.

      1. Using a heat light, heat the vehicle body and No. 1 back door emblem.

      2. Remove the release paper from the No. 1 back door emblem.

        Tip:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Engage the 2 pins and install the No. 1 back door emblem.

        B333701C01

        *a

        Location pin

        -

        -

  2. INSTALL BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new back door name plate.

      1. Using a heat light, heat the vehicle body and back door name plate.

      2. Remove the release paper from the back door name plate.

        Tip:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the back door name plate as shown in the illustration.

        B333702C01

        *a

        Profile of back door panel

        -

        -

        Reference Measurement

        Area

        Measurement

        A

        51.4 mm (2.02 in.)

        B

        45.8 mm (1.80 in.)

        C

        157.3 mm (6.19 in.)

        D

        66.8 mm (2.63 in.)

  3. INSTALL NO. 2 BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body.

      3. Clean off any tape adhesive residue with cleaner.

    2. Install a new No. 2 back door name plate.

      1. Using a heat light, heat the vehicle body and No. 2 back door name plate.

      2. Remove the release paper from the No. 2 back door name plate.

        Tip:

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. Install the No. 2 back door name plate as shown in the illustration.

        B333703C01

        *a

        Profile of back door panel

        -

        -

        Reference Measurement

        Area

        Measurement

        A

        68.3 mm (2.69 in.)

        B

        191.2 mm (7.53 in.)

        C

        48.3 mm (1.90 in.)

        D

        39.1 mm (1.54 in.)