DOOR CONTROL SWITCH INSPECTION

PROCEDURE

1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for LHD) (for Model with Jam Protection Function on Driver Door Window Only)

   1. w/o Rear Power Window

      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         3 (L) - 7 (E)	Lock switch pushed	Below 1 Ω
         3 (L) - 7 (E)	off	10 kΩ or higher
         9 (UL) - 7 (E)	Unlock switch pushed	Below 1 Ω
         9 (UL) - 7 (E)	off	10 kΩ or higher

   2. w/ Rear Power Window

      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         2 (L) - 1 (E)	Lock switch pushed	Below 1 Ω
         2 (L) - 1 (E)	off	10 kΩ or higher
         9 (UL) - 1 (E)	Unlock switch pushed	Below 1 Ω
         9 (UL) - 1 (E)	off	10 kΩ or higher

2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for RHD) (for Model with Jam Protection Function on Driver Door Window Only)

   1. w/o Rear Power Window

      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         1 (L) - 7 (E)	Lock switch pushed	Below 1 Ω
         1 (L) - 7 (E)	off	10 kΩ or higher
         3 (UL) - 7 (E)	Unlock switch pushed	Below 1 Ω
         3 (UL) - 7 (E)	off	10 kΩ or higher

   2. w/ Rear Power Window

      1. 

         *a	Component without harness connected (Power Window Regulator Master Switch Assembly)

         Measure the resistance according to the value(s) in the table below.

         Standard Resistance

         Tester Connection	Condition	Specified Condition
         2 (L) - 9 (E)	Lock switch pushed	Below 1 Ω
         2 (L) - 9 (E)	off	10 kΩ or higher
         8 (UL) - 9 (E)	Unlock switch pushed	Below 1 Ω
         8 (UL) - 9 (E)	off	10 kΩ or higher