STARTER INSTALLATION

PROCEDURE

1. INSTALL STARTER ASSEMBLY

   1. Install the starter assembly with the 2 bolts.

      37 N*m

      377 kgf*cm

      27 ft.*lbf

   2. Connect the connector.

   3. Connect terminal 30 with the nut.

      9.8 N*m

      100 kgf*cm

      87 in.*lbf

   4. Close the terminal cap.

2. INSTALL NO. 1 ENGINE UNDER COVER

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note:

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click hereClick hereClick hereClick hereClick here