CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE V-BANK COVER


    1. A01E0A6

      Remove the 2 nuts and the V-bank cover.

  3. REMOVE NO. 2 VENTILATION HOSE

    A01DZMI

  4. REMOVE AIR CLEANER ASSEMBLY


    1. A01E2MF

      Disconnect the vacuum hose.

    2. Disconnect the MAF meter connector.

    3. Remove the 2 wire harness clamps.

    4. A01DZ4O

      Loosen the 2 hose clamps.

    5. Remove the 2 bolts and air cleaner.

  5. REMOVE THROTTLE BODY


    1. A01DYJS

      Disconnect the throttle motor connector.

    2. Remove the 4 bolts and throttle body.

    3. Remove the gasket from the intake air surge tank.

  6. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)

    A01DVZN

    1. Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.

  7. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)

    A01DW9L

    1. Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.