NAVIGATION ANTENNA REMOVAL

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note:

    • After turning the engine switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  2. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    1. Remove the instrument panel safety pad sub-assembly (Click here).

  3. REMOVE NO. 1 HEATER TO REGISTER DUCT

    Click here

  4. REMOVE NO. 2 HEATER TO REGISTER DUCT

    Click here

  5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT

    Click here

  6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT

    Click here

  7. REMOVE DEFROSTER NOZZLE ASSEMBLY

    Click here

  8. REMOVE NAVIGATION ANTENNA ASSEMBLY

    1. B249078

      Detach the 3 clamps.

    2. Remove the 2 screws and navigation antenna.