FRONT PROPELLER SHAFT ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  2. LOOSEN FRONT PROPELLER SHAFT ASSEMBLY


    1. B006AV8C01
      *a Matchmark

      Put matchmarks on the transfer companion flange and front propeller shaft.

    2. Using a 6 mm socket hexagon wrench, loosen the 6 bolts.

      Note

      To prevent the front propeller shaft assembly from falling, only loosen the bolts. Do not remove them.

    3. B006AY2C01
      *a Matchmark

      Put matchmarks on the front differential companion flange and front propeller shaft.

    4. Using a 6 mm socket hexagon wrench, loosen the 6 bolts.

      Note

      To prevent the front propeller shaft assembly from falling, only loosen the bolts. Do not remove them.

  3. REMOVE REAR ENGINE MOUNTING MEMBER


    1. B006GLT

      Support the transfer assembly with a transmission jack.

      Note

      Do not install the adjustable attachment and plate lift attachment to the transmission oil pan.

    2. B006CWM

      Remove the 6 bolts.

    3. B006CEU

      Remove the 5 nuts and rear engine mounting member, and remove the rear engine mounting member from the automatic transmission assembly.

  4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY


    1. Remove the 12 bolts, 4 universal joint washers.

    2. Remove the front propeller shaft assembly from the companion flanges.

      Note

      Do not bend the front propeller shaft at an excessive angle.