FRONT SUSPENSION MEMBER(for 2WD) INSTALLATION

PROCEDURE

1. INSTALL FRONT STABILIZER BAR (w/o Active Stabilizer System)

   Click here

2. INSTALL FRONT ACTIVE STABILIZER CONTROL ACTUATOR ASSEMBLY (w/ Active Stabilizer System)

   Click here

3. INSTALL RACK AND PINION POWER STEERING GEAR ASSEMBLY

   Click here

4. INSTALL NO. 2 SIDE RAIL REINFORCEMENT LH

   
   

   1. 

      Install the No. 2 side rail reinforcement LH with the 2 bolts and 2 nuts.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

5. INSTALL NO. 2 SIDE RAIL REINFORCEMENT RH

   Tech Tips

   Perform the same procedure as for the LH side.

6. INSTALL FRONT ENGINE MOUNTING INSULATOR

   
   

   • for 8GR-FKS:

     Click here

   • for V35A-FTS:

     Click here

7. CONNECT FRONT FRAME CROSSMEMBER SUB-ASSEMBLY

   
   

   • for 8GR-FKS:

     Click here

   • for V35A-FTS:

     Click here

8. INSTALL ENGINE AND TRANSMISSION

   
   

   • for 8GR-FKS:

     Click here

   • for V35A-FTS:

     Click here