PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01DZU9

      Remove the 2 bolts and heat insulator.

    2. Disconnect the switch connector.

    3. A01DVE3E01

      Using a screwdriver, bend the tabs of the lock washer.

    4. Remove the nut and lock washer.

    5. Remove the bolt and park/neutral position switch.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch as the detent spring may become detached from the manual valve lever shaft.