FRONT WIPER MOTOR INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Ensure that fingers or articles of clothing do not get caught by moving parts when performing this test.

PROCEDURE


  1. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for LHD)


    1. A004ILHE03
      Text in Illustration
      *a

      Component without harness connected

      (Windshield Wiper Motor Assembly)

      Check the LO operation.

      OK:
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 5 (+1)

      Battery negative (-) → Terminal 4 (E)

      		 Motor operates at low speed (LO)

      If the result is not as specified, replace the windshield wiper motor assembly.

    2. Check the HI operation.

      OK:
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (+2)

      Battery negative (-) → Terminal 4 (E)

      		 Motor operates at high speed (HI)

      If the result is not as specified, replace the windshield wiper motor assembly.

  2. INSPECT WINDSHIELD WIPER MOTOR ASSEMBLY (for RHD)


    1. A004ILHE07
      Text in Illustration
      *a

      Component without harness connected

      (Windshield Wiper Motor Assembly)

      Check the LO operation.

      OK:
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (+1)

      Battery negative (-) → Terminal 5 (E)

      		 Motor operates at low speed (LO)

      If the result is not as specified, replace the windshield wiper motor assembly.

    2. Check the HI operation.

      OK:
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 4 (+2)

      Battery negative (-) → Terminal 5 (E)

      		 Motor operates at high speed (HI)

      If the result is not as specified, replace the windshield wiper motor assembly.