ELECTRIC PARKING BRAKE SWITCH INSPECTION

PROCEDURE


  1. INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY


    1. B008023C16
      *A for LHD
      *a

      Component without harness connected

      (Electric Parking Brake Switch Assembly)
      A01RA4QC17
      *A for RHD
      *a

      Component without harness connected

      (Electric Parking Brake Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      for LHD
      Tester Connection Condition Specified Condition
      9 (LOK1) - 16 (GND1) OFF(Release) 95.046 to 109.354 kΩ
      ON(Lock) 1.98 to 2.42 kΩ
      Switch not operated 95.046 to 109.354 kΩ
      10 (LOK2) - 16 (GND1) OFF(Release) 5.394 to 6.206 kΩ
      ON(Lock) 0.968 to 1.232 kΩ
      Switch not operated 5.394 to 6.206 kΩ
      1 (RLS1) - 16 (GND1) OFF(Release) 0.968 to 1.232 kΩ
      ON(Lock) 5.394 to 6.206 kΩ
      Switch not operated 5.394 to 6.206 kΩ
      2 (RLS2) - 16 (GND1) OFF(Release) 0.968 to 1.232 kΩ
      ON(Lock) 5.394 to 6.206 kΩ
      Switch not operated 5.394 to 6.206 kΩ
      for RHD
      Tester Connection Condition Specified Condition
      16 (LOK1) - 9 (GND1) OFF(Release) 95.046 to 109.354 kΩ
      ON(Lock) 1.98 to 2.42 kΩ
      Switch not operated 95.046 to 109.354 kΩ
      15 (LOK2) - 9 (GND1) OFF(Release) 5.394 to 6.206 kΩ
      ON(Lock) 0.968 to 1.232 kΩ
      Switch not operated 5.394 to 6.206 kΩ
      8 (RLS1) - 9 (GND1) OFF(Release) 0.968 to 1.232 kΩ
      ON(Lock) 5.394 to 6.206 kΩ
      Switch not operated 5.394 to 6.206 kΩ
      7 (RLS2) - 9 (GND1) OFF(Release) 0.968 to 1.232 kΩ
      ON(Lock) 5.394 to 6.206 kΩ
      Switch not operated 5.394 to 6.206 kΩ

      If the result is not as specified, replace the electric parking brake switch assembly.