IGNITION KEY CYLINDER LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System)


    1. B0027JV

      Attach the claw to install the key cylinder light assembly.

    2. Connect the connector.

  2. INSTALL TRANSPONDER KEY COIL (IGNITION KEY CYLINDER LIGHT) (w/ Engine Immobiliser System)

    B0025K8C01
    B0069FO Install in this Direction

    1. Attach the claw to install the transponder key coil (ignition key cylinder light).

    2. Connect the connector.

  3. INSTALL UPPER STEERING COLUMN COVER

    Click here

  4. INSTALL LOWER STEERING COLUMN COVER

    Click here