TRANSPONDER KEY AMPLIFIER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    For vehicles with SRS:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE STEERING COLUMN LOWER COVER

    A01E07KE01

    1. Remove the 3 screws and cover lower.

  3. REMOVE STEERING COLUMN UPPER COVER

    A01E07KE01

    1. Remove the 3 screws and cover lower.

  4. REMOVE TRANSPONDER KEY AMPLIFIER


    1. A01E1H0E02

      Using a screwdriver, widen the claw attached to the upper bracket by approximately 1.0 mm (0.039 in.).

    2. Pull out the transponder key amplifier with the claw open.

    3. Disconnect the amplifier connector and remove the transponder key amplifier.