ENTRY AND START SYSTEM(for Entry Function) SYSTEM DIAGRAM

  1. ENTRY AND START SYSTEM(for Entry Function)

    B341361E03
    B341362E03
    B341363E04

  2. WIRELESS DOOR LOCK CONTROL SYSTEM

    B438294E01
    B438295E01
    B438296E01
    B343406E02
    B438298E01
    E271214E09

  3. Double Locking System (w/ Double Locking System)

    B438303E01

Component

Function

Front door outside handle assembly LH/RH

Receives request signals from the certification ECU (smart key ECU assembly) via the built-in electrical key antenna (front door) and forms the vehicle exterior detection area.

Uses the built-in touch sensor (lock sensor/unlock sensor) to detect the operation of the front door outside handle assembly and sends signals to the certification ECU (smart key ECU assembly).

No. 1 indoor electrical key antenna assembly (front floor)

No. 2 indoor electrical key antenna assembly (rear floor)

Receives the request code from the certification ECU (smart key ECU assembly) and forms the vehicle interior detection area.

No. 3 indoor electrical key antenna assembly

(inside luggage)

Receives the request code from the certification ECU (smart key ECU assembly) and forms the luggage interior detection area.

Electrical key antenna (outside luggage)

Receives the request code from the certification ECU (smart key ECU assembly) and forms the luggage exterior detection area.

Back door opener key switch

Sends switch operation signals to the certification ECU (smart key ECU assembly).

Door control receiver

Receives the entry and start system code/wireless code sent from the electrical key transmitter sub-assembly and sends it to the certification ECU (smart key ECU assembly).

Wireless door lock buzzer

Sounds when warning functions operate in accordance with certification ECU (smart key ECU assembly) control.

Electrical key transmitter sub-assembly

Sends the ID code upon receiving a request signal.

Certification ECU (smart key ECU assembly)

Sends request codes to each electrical key antenna.

Distinguishes and verifies the ID code from the electrical key transmitter sub-assembly and sends signals to each ECU in response to operated functions (controls entire system).

Performs encryption code communication with the steering lock ECU (steering lock actuator assembly) when ignition operations are performed.