THERMOSTAT INSTALLATION

PROCEDURE

1. INSTALL THERMOSTAT

   

   1. Align the jiggle valve with the top of the water inlet to install the thermostat.

2. INSTALL WATER INLET

   1. Install a new gasket to the water inlet.

   2. Temporarily install the water inlet together with the thermostat with the 4 bolts by hand.

   3. Using several steps, uniformly tighten the 4 bolts.

      Tip:

      Refer to "SPECIFICATIONS - STANDARD BOLT" for the tightening torque.

3. CONNECT NO. 2 RADIATOR HOSE

   Click hereClick here

4. INSTALL COMPRESSOR WITH PULLEY ASSEMBLY (w/ Air Conditioning System)

   Click hereClick here

5. ADD ENGINE COOLANT

   Click here

6. INSPECT FOR COOLANT LEAK

   Click here

7. INSTALL NO. 1 ENGINE UNDER COVER

   Click hereClick here