DIFFERENTIAL OIL SEAL(for LH Side) REPLACEMENT

PROCEDURE

1. REMOVE FRONT DRIVE SHAFT ASSEMBLY

   Click hereClick hereClick here

2. REMOVE TRANSMISSION CASE OIL SEAL

   

   1. Using SST, remove the transmission case oil seal.

      09308-00010

3. INSTALL TRANSMISSION CASE OIL SEAL

   1. Coat the lip of a new transmission case oil seal with MP grease.

   2. 

      *a	-0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

      Using SST and a hammer, tap in the transmission case oil seal to the manual transmission case.

      09608-32010

      09950-70010

      09951-07100

      Standard depth

      -0.5 to 0.5 mm (-0.0197 to 0.0196 in.)

      Note:

      Do not damage the transmission case oil seal lip.

4. INSTALL FRONT DRIVE SHAFT ASSEMBLY

   Click hereClick hereClick here