INPUT SHAFT DISASSEMBLY

PROCEDURE

1. REMOVE REAR INPUT SHAFT BEARING SHAFT SNAP RING

   1. 

      Using a snap ring expander, remove the rear input shaft bearing shaft snap ring from the input shaft.

2. REMOVE REAR INPUT SHAFT RADIAL BALL BEARING

   1. 

      Using SST, remove the rear input shaft radial ball bearing from the input shaft.

      09950-40011

      09951-04020

      09952-04010

      09953-04020

      09954-04010

      09955-04011

      09957-04010

      09958-04011

      09631-20031

3. REMOVE 6TH GEAR SUB-ASSEMBLY

   1. 

      Using SST and press, press out the 6th gear sub-assembly from the input shaft.

      09950-00020

4. REMOVE 3RD GEAR

   1. 

      Using SST and press, press out the 3rd gear from the input shaft.

      09950-00020

   2. 

      Remove the spacer from the input shaft.

5. REMOVE 4TH GEAR

   1. 

      Using SST and press, press out the 4th gear from the input shaft.

      09950-00020

6. REMOVE INPUT SHAFT SNAP RING

   1. 

      Using 2 screwdrivers and a hammer, tap out the input shaft snap ring from the input shaft.

      Note:

      Use a piece of cloth to prevent the snap ring from flying off.

7. REMOVE FRONT INPUT SHAFT BEARING

   1. 

      Using SST and press, remove the front input shaft bearing from the input shaft.

      09950-00020