EGR VALVE INSTALLATION

PROCEDURE

1. INSTALL STUD BOLT

   Tip:

   If a stud bolt is deformed or the threads are damaged, replace it.

   1. Using an E8 "TORX" wrench, install the 2 stud bolts.

      3.0 N*m

      31 kgf*cm

      27 in.*lbf

2. INSTALL EGR VALVE ASSEMBLY

   1. Install a new EGR valve gasket to the cylinder head sub-assembly.

   2. Install the EGR valve assembly with 2 new nuts and the bolt.

      28 N*m

      286 kgf*cm

      21 ft.*lbf

   3. Connect the connector to the EGR valve assembly.

   4. Connect the water hose to the EGR valve assembly and slide the clip to secure it.

3. INSTALL INTAKE MANIFOLD

   Click hereClick here