RADIO RECEIVER INSTALLATION

PROCEDURE

1. INSTALL NO. 2 RADIO BRACKET (for Radio Receiver Type)

   1. Install the No. 2 radio bracket with the 3 screws.

      4.0 N*m

      40 kgf*cm

      35 in.*lbf

2. INSTALL NO. 2 RADIO BRACKET (for Radio and Display Type)

   1. Install the No. 2 radio bracket with the 3 screws.

      4.0 N*m

      40 kgf*cm

      35 in.*lbf

3. INSTALL NO. 1 RADIO BRACKET (for Radio Receiver Type)

   1. Install the No. 1 radio bracket with the 3 screws.

      4.0 N*m

      40 kgf*cm

      35 in.*lbf

4. INSTALL NO. 1 RADIO BRACKET (for Radio and Display Type)

   1. Install the No. 1 radio bracket with the 3 screws.

      4.0 N*m

      40 kgf*cm

      35 in.*lbf

5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio and Display Type)

   1. Connect the connectors.

   2. 

      Insert the radio and display receiver assembly with bracket to attach the 4 clips on its backside.

      Note:

      When inserting the radio and display receiver, do not press the knobs on it.

   3. Install the radio and display receiver assembly with bracket with the 4 screws.

      4.0 N*m

      40 kgf*cm

      35 in.*lbf

6. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

   1. Connect the connectors.

   2. 

      Insert the radio receiver assembly with bracket to attach the 4 clips on its backside.

      Note:

      When inserting the radio receiver, do not press the knobs on it.

   3. Install the radio receiver assembly with bracket with the 4 screws.

      4.0 N*m

      40 kgf*cm

      35 in.*lbf

7. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

   Click here

8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

   Click here

9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

   Click here

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).