BRAKE BOOSTER(for LHD) DISASSEMBLY

PROCEDURE

  1. REMOVE CHECK VALVE GROMMET

    1. Remove the check valve grommet from the brake booster assembly.

  2. REMOVE VACUUM SENSOR ASSEMBLY (w/ Stop and Start System)

    1. Remove the vacuum sensor assembly from the brake booster assembly.

    2. Remove the check valve grommet from the brake booster assembly.

  3. REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS

    1. C302762

      Loosen the lock nut and remove the brake master cylinder push rod clevis and lock nut from the brake booster assembly.